轉自
[HTC Diamond] HTC Diamond 鑽石 刷機hardspl解鎖+硬啟+三色
感謝Olipro給大家帶來那麼多機型的hardspl
此版為最新版，可以刷任何rom啦！
操作步驟比較簡單——
中文如下：
1.將手機與計算機連接同步，右下角的同步軟件變綠
2.解壓Unsigned-Hard-SPL-Diamond-OliNex.zip到你的電腦上，然後將SSPL-Manual.exe複製到手機中，點擊運行，此時屏幕是黑的，不必擔心
3.運行ROMUpdateUtility.exe，按提示的步驟安裝HardSPL。
英文原文：
Installation Instructions are the same:
1) Download, extract to an empty folder.
2) Run RomUpdateUtility.exe, Have Phone Synced with PC in Windows Mobile
3) follow steps, check device for prompts after PC shows loading bar. it should go to black screen now.
4) SPL flashes, device automatically reboots, job done.
5) to confirm you got it installed, go into bootloader mode (volume down + reset) and verify the screen shows 1.40.OliNex.
Anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe to the device and run it.
INSTALLING THIS WILL HARD-RESET THE DEVICE
NOTE: this has overwrite protection, so don't try flashing another SPL using hardSPL.
if someone needs to revert to stock SPL for warranty reasons, we will soon post a stock SPL downgrade package.
enjoy!
Unsigned-Hard-SPL-Diamond-OliNex.zip (1.92 MB) Diamond 硬啟（格式化）方法
操作步驟：
同時按「VOICE DOWN"鍵（就是側面聲音向下的鍵）和「action」鍵（就是導航圓圈中間的鍵），然後用筆按一下「reset」鍵（就是隱藏在筆槽內的紅色鍵），然後系統就會硬啟，
硬啟後有三個選項：
1.是按音量向上鍵，將系統恢復到出廠設置，但是你存放在內置存儲器（4G內存）中的數據不丟失；
2.是音量向下鍵將系統恢復到出廠設置，同時格式化內置存儲器；
3.按其他鍵取消。
Diamond 進三色屏方法
同時按住 電源和音量降低鍵，再用筆按一下「reset」鍵，電源和音量降低鍵不要松，直到出現三色。
